 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Stainless Steel Casting Ring Made from 300 series stainless steel, this SOLID casting ring allows you to fuse DEEP in order to make the kind of thick glass rounds required to create fabulous fused glass bowls or plates! Just place this stainless steel casting ring lined with the fiber felt that is included on your prepared (kiln washed) kiln shelf and fill it with strips of your favorite compatible glass, OR use the ring to catch glass pouring from from a pot melt! You can fire to full fuse without any worries, the ring will contain the molten glass thus allowing you to make thick glass slabs for slumping into or draping over your favorite mold! The INTERIOR dimensions of this STURDY stainless steel ring measures 7 inches by 1 1/4 inches high. The Two Lasses have also used this versatile casting ring to create giant roundels (see item photo) for a unique and eye-catching pieces of glass art! A 1.5" x 15" strip of fiber felt is included with your purchase! |
|
$31.99
|
|||
|
|
Cross Pendant Casting Mold This lovely glass casting/fusing mold will allow you to create some lovely symbolic (cross) jewelry pendants or focal pieces that can be used to embellish another larger work of glass art.nMeasuring 3.75 inches in length by 2.75 inches in width and 1 inch in height this mold will yield a finished cross that will measure approximately 2.5 inches in length, 2 inches across and 3/8th's inches deep and it is a GREAT little mold for hobbyists with smaller, table-top sized kilns! It takes about an ounce of frit to fill this casting mold and best of all, this cleverly designed mold has a built-in island that will create the ideal opening that will allow you to hang your pendant cross without the hassle of drilling a hole applying messy, glue-on bails. |
|
$24.99 |
|||
|
|
Heart Pendant and Earring Casting Mold
With this "love-ly" glass frit casting mold, you can create a delightful pendant heart and matching earring set OR three uniquely charming pendant heart pendants! The mold itself measures 4.5 inches across its widest point, 2 inches across at its smallest end, and 1.5 inches deep making it an ideal fit for just about ANY small, table-top kiln. It will yield THREE completed hearts that will have an off-center hole. Approximately 1.5 ounces of frit is all the glass needed to fill all THREE heart pods and we will send you a complimentary packet and detailed firing instructions with your purchase! The largest heart pod measures 2 inches across at its widest point and 2 1/4 inches in length at it's longest and will yield a completed piece (i.e., fired) that measures approximately 1.5 inches by 1 3/4 inches. The two smaller heart pods measure 1 3/8th inches across at their widest point and 1.5 inches in length at their longest, yielding a finished (i.e., fired) piece measuring approximately 1 inch by 1 1/4 inches. Because of the unique design of this frit casting mold, you won't have to drill a hole or add expensive findings using messy, sticky glues because the hole is already crafted into your piece and positioned in a wonderfully whimsical fashion (off-center) that will add interest to your glass design. |
|
$29.99 |
|||
|
|
Drawer Pull, Bracelet or Barrette Casting Mold With this beautiful frit casting mold, you can create four elegant drawer/cabinet door pulls OR four different bracelet or barrette blanks (bracelet or barette blanks would then be slumped over a bracelet mandrel in a separate firing). The mold itself measures 9 inches long, 7 inches wide, and 7/8th's inches deep making it an ideal fit for MOST small, table-top kilns. It will yield FOUR drawer/cabinet door pulls or bracelet blanks that will measure 4 3/4 inches in length, 1 inch in width and up to 5/8th's inches deep when fired. The whimsical "swirls" pattern will add interest and texture to whatever color palette you choose for your glass art. Simply fill this mold with your own glass scraps (compatible, please) or manufactured frit and fire to a full fuse. Each pod requires about 3 ounces of frit (12 ounces of glass to fill all four pods). |
|
$29.99 |
|||
|
|
||||||
|
Rocker Style Light Switch Plate Casting Mold
This exciting NEW glass casting/fusing mold will allow you to create custom light switch plates (NEW, "rocker" style) to compliment any decor! This specially designed light switch plate mold has two pre-drilled holes into which you will insert a small roll of ThinFire Shelf paper (included with your purchase). This will create the two openings that allow you to easily mount your switch plate onto the wall without having to drill any holes!! Measuring 6 inches in length by 4.75 inches in width and 1.5 inches in height this mold will yield a finished light switch plate that will measure 5 inches in length, 3 3/8th's inches across and 5/8th's inches deep and it is a GREAT little mold for hobbyists with smaller, table-top sized kilns! It takes about 4.5 ounces of frit to fill this casting mold. Just think how easily you can lend an elegant, designer touch to any room in your house with a custom-designed light switch plate! |
|
$29.99 |
|
|||
|
Peace Casting Mold
This funky little mold for glass casting/fusing measures 2.5 inches in diameter and .5 inches deep. With a little frit or scrap glass you can create a retro 60's pendant piece or focal object with which you could embellish another work of art. Simply fill this mold with your own glass scraps (compatible, please) or manufactured frit and fire to a full fuse. It takes about 20 grams (less than an ounce) of frit to fill this casting mold. |
|
$26.99 |
||||
|
|
Tribal Beads Casting Mold
With this frit casting mold, you can create five exciting tribal bead shapes; two small, two medium and one large. The beads measure 2, 2.5 and 3 inches in length respectively and are all 1.25 inches across at their widest point and .25 inches in depth. The mold itself measures 7 inches across , 4.75 inches wide, and 1 inch deep. Simply fill this mold with your own glass scraps (compatible, please) or manufactured frit and fire to a full fuse. Complete instructions are included with this mold. |
|
$39.99 |
|||
|
|
||||||
|
Polka-Dot Drop Ring Mold
Our sturdy, bisque-fired ceramic, round Polka Dot Slump/Drop Ring Mold measures eight inches in diameter with an inside opening of 4 inches making it the ideal slump or drop ring mold for those with smaller table-top sized kilns. There are TWENTY small polka dots of 3/8th inches in diameter that will lend added interest to your completed project! You will be able to control the depth of your finished piece by using whatever kiln post size you wish (i.e., for a 2 inch deep dish or bowl, you will use your 2 inch tall kiln posts to prop up the mold). When using this mold to create an unusual vase or candle holder, you would use taller kiln posts (8 inches or more) to reach the desired depth. With this versatile slump/drop ring mold and just one piece of your favorite 3mm patterned glass, you can slump a very unique looking dish! You can also use this nifty little mold for damming glass to create thick (up to 1/4 inch) glass roundels for decorating. It's easy ... just place some of that scrap glass you've been collecting (fusible and compatible, please), in the center opening of this mold and fire to a full fuse to create a unique architectural roundel, coaster or trivet! |
|
$29.99 |
|
|||
|
Snowflake Mold Back just in time for winter, this delightful snowflake mold measures 3.5 inches square and creates a lovely snowflake that measures 2 3/4 inches in diameter! Simply fill this mold with your glass scraps or frit to create a unique ornament to give as a gift or to hang on your tree! This lovely snowflake mold makes a delightful paperweight too! A fun and easy fusing project the whole family can enjoy! Check out our fabulous new assortment of glass frit and create brightly colored snowflakes to match any decor! We'll include a one foot length of our high temperature wire, so you can fuse a hanger/hook right into your piece! |
 |
$21.99 |
||||
|
Star Pod Mold This delightful star pod mold will allow you to create delightful star shaped mini-paperweights and/or holiday ornaments for your tree or for gift giving! Be ready for any party with your own fancy "star-stoppers"; simply attach your fused stars to cork stoppers (available at any craft store) and you have a great gift for your host or hostess! It just couldn't be simpler to create multiple celestial stars with this mold and pieces of your favorite scrap fusing glass, transparent and/or opaque frit! This mold measures 6 3/4 inches square and each of the four star "pods" measures 2 1/4 inches across by 5/8th's of an inch deep. We've thought of lots of ways to add sparkle to your holiday table using the charming little stars you can create with this mold, but we're sure YOU can think of plenty more!! We'll even include a one foot length of our high temperature wire, so you can fuse a hanger/hook right into your stars so you can pop them right on the tree, wire them onto a wreath or suspend them from a chandelier! Another fun and easy fusing project the whole family can enjoy! |
 |
$24.99 |
||||
|
|
Hemisphere Paperweight Mold This is the mold you need to create domed paperweights easily from frit or scrap glass; it truly is a snap! Just fill the mold to the brim with small pieces of glass or frit and fire to a full-fuse temperature. The mold itself is 2-1/2 inches high by 3-3/4 inches wide. It creates a paperweight that is approximately 1-3/4 inches high by 3 inches wide at the base. For complete instructions on how to prepare and use this lovely paperweight mold, visit our Tips page and read the article entitled " How To Prepare A Mold For Glass Fusing (Or How To Get A Little Extra Mileage From Your Pantyhose!)"! The Two Lasses use this mold in their popular glass classes and the students are amazed at how quickly and easily they can create a beautiful paperweight that is perfect for gift-giving. Be sure to check out our fabulous selection of medium sized frit! |
|
$23.99 |
|||
|
|
||||||
|
Murrini Maker Mold This cleverly designed ceramic mold by Uroboros, enables you to make your own murrini which you can then use to embellish fused glass creations and beads. Simply fill the grooves with frit, glass chips, noodles and/or stringers, and heat to full-fuse temperature. When cool the resulting canes can then be sliced into smaller pieces (using mosaic nippers) and incorporated and refused into any one of a number of your fused glass creations or they can be twisted and pulled in a torch flame to create other unusual fused glass beads and adornments. This wonderful murrini mold measures 5 3/4 inches by 6 1/4 inches and has 7 tube-slots. Two tube-slots measure a 1/2 inch across, two others measure 3/8 inch across and three measure 1/4 inch across for a nice assortment of cane sizes for your murrini creations! For complete instructions on how to prepare and use this unique murrini mold visit our Tips page. Additionally, this mold doubles as the perfect rack on which to place your on-mandrel lampworked beads for annealing in a kiln. This will hold them separate them from one another and keep them from rolling on the kiln shelf. |
|
$27.99 |
||||
|
|
||||||
|
Tube Mold - Makes GIANT Murini Pieces! This tube mold measures 2 inches across by four inches in length and has an inside opening that measures 1 1/4 inches in diameter. By filling the tube with with scrap glass, noodles, stringers, and/or rods you can create fabulous "giant" murrini! The resulting glass tube can be easily cut into wafers using a tile saw. The wafers can then be used as embellishments in other glass art projects, or they can be fused together to create your own uniquely patterned piece. We'll even include a piece of ThinFire paper with which to line the inside of the tube mold! |
|
$16.99 |
||||
|
|
||||||
|
THIN Fiber Felt - FOUR 6" x 6" Sheets What could be better than our thick fiber felt?? A fabulously thin version of the very same fiber “paper” that is felt-like in texture and will allow you to create perfectly thin channels through your glass creations so that you can then insert memory wire, nylon cord or any other material to link your glass pieces! Just look at the fabulous bracelet that our talented friend, Allison Schaffer made using this thin fiber felt! This fiber felt may be thin, BUT its density stands up to multiple layers of glass and cuts easily with scissors, any utility knife and paper craft punches (pictured at right) so that you can create three dimensional designs in your glass. Best of all, it does not disintegrate in the kiln leaving dusty remnants on the shelf, but remains intact until you remove it (quickly and EASILY) to be disposed of in the trash! At just 1/16th’s of an inch thick, you won't find a better way to make perfect channels through your glass! We sell our thin fiber felt in FOUR 6” x 6” sheets! Detailed, step by step instructions (with photos) on how to make perfect channels through your glass, can be found on our Tips page! |
|
$12.99
|
||||
|
|
||||||
|
THICK Fiber Felt - FOUR 6" x 6" Sheets We finally found it! A fabulously dense fiber “paper” that is like heavy felt in texture and thickness! With fiber felt, you can you can give texture and dimension to your warm glass creations by designing your own unique "canvas" for slumping and draping your glass! This fiber felt's density stands up to multiple layers of glass and cuts easily with scissors or any utility knife. Best of all, it does not disintegrate in the kiln leaving dusty remnants on the shelf, but remains intact until you remove it (quickly and easily) to be disposed of in the trash! Cut into thin strips, fiber felt creates the perfect horizontal channel through your pendant pieces as well! A full 3/16th’s of an inch thick (only just a shade under a ¼ inch), you will find all kinds of uses for this fabulous product which we sell in FOUR 6” x 6” sheets! Detailed, step by step instructions (with photos) on how to make perfect channels through your glass, can be found on our Tips page! |
|
$14.99
|
||||
|
|
||||||
|
Kiln Wash Shelf Primer - 24 oz. powder This is a BIG, 24 oz. tub of powdered high-quality, "Hi-Fire Shelf Primer" (a.k.a. kiln wash) by Hotline. The ideal primer to use on your kiln shelf and all your ceramic molds, this is the brand of kiln wash the Two Lasses use in their studios and in their popular glass fusing classes. Complete instructions for mixing are printed right on the tub - mix as much or as little as you want/need! |
|
$22.99
|
||||
|
|
||||||
|
Bullseye ThinFire Shelf Paper - TWENTY 10" x 10" sheets This heat-resistant, lightweight, ceramic-impregnated shelf paper by Bullseye, provides excellent separation between your kiln shelf and your fused glass project in kiln firing applications up to 1600F. Compared to Kiln Wash, ThinFire Shelf Paper reduces shelf preparation time and improves surface release qualities while providing a flawless finish! Cut to the ideal size for small, table-top sized kiln shelves, you will receive twenty sheets measuring 10" x 10"! (Not for use in direct contact with iridized glass) |
|
$23.99
|
||||
|
|
||||||
|
Bullseye ThinFire Shelf Paper - TEN 21" x 21" sheets This heat-resistant, lightweight, ceramic-impregnated shelf paper by Bullseye, provides excellent separation between your kiln shelf and your fused glass project in kiln firing applications up to 1600F. Compared to kiln wash, ThinFire Shelf Paper reduces shelf preparation time and improves surface release qualities while providing a flawless finish! Ideal for fusing artists with larger kilns and bigger projects, you will receive ten sheets measuring 21" x 21"! (Not for use in direct contact with iridized glass) |
 |
$39.99 |
||||
|
|
||||||
|
Kaiser-Lee Board for Mold Making - TWO 6" x 6" Pieces This wonderful medium allows you to create your own unique molds for slumping, draping, dropping and casting! Kaiser-Lee Board is dry, light weight and easy to cut and/or sculpt! KLB is versatile and can be re-cut and re-shaped to alter or add to your designs. Best of all, you are now able to create unusual molds that fit into your kiln! You will receive TWO 6 x 6 x 1 inch thick pieces of Kaiser-Lee Board (a total of 72 square inches). |
|
$29.99 |
||||
|
|
||||||
|
Kaiser-Lee Board for Mold Making - TWO, 8" x 8" pieces! This wonderful medium allows YOU to create your own molds for slumping, draping, dropping and casting! Kaiser-Lee Board is dry, light weight and easy to cut and/or sculpt! KLB is versatile and can be re-cut and re-shaped to alter or add to your designs. Best of all, you are now able to create unusual molds that fit into your kiln! You will receive two 8 x 8 x 1 inch thick pieces of Kaiser-Lee Board (a total of 128 square inches). |
|
$39.99
|
||||
|
|
||||||
